Ice Mold Tube Luges

Why pay for and expensive professional Ice Sculptor when you can mold one right in your own freezer? With an easy mold and tubing system we offer several different designs to suit any party! Fill er up, freeze and let the party begin. Each mold is designed with a tube system that when you pour a shot through the top it spurts out from the appropriate slot! Choose from risky bachelorette party themes to ringing in the New Year. These are a super fun and inexpensive way to get the party rollin! Please see below pictures for luge making directions, and dont forget to check out our Ice Luge Lights for the ultimate show!

Penis Luge 1.10 lbs Dimensions: 7.75"d x 14.5"w x 12.5"h	Boobs Luge 1 lbs Dimensions: 7.25"d x 11.5"w x 12"h
Heart Luge 0.90 lbs Dimensions: 6.75"d x 10.5"w x 11.5"h	Stars Luge 0.75 lbs Dimensions: 6.75"d x 10.5"w x 11.5"h
4 Leaf Clover Luge 0.75 lbs Dimensions: 6.75"d x 10.75"w x 10.5"h	21 Luge 0.90 lbs Dimensions: 7"d x 10.5"w x 11.5"h
Luge Instructions: A. FILLING (add food coloring if you desire) 1. Pour water to halfway seam-line (approx. 1 Gallon). Do not fill to the top! 2. Freeze for 24 hours 3. Fill to top with cold water (Warm water will cause cracking) 4. Freeze for additional 24 hours B. DE-MOLDING (Wear protective gloves, and take your time!) 1. Gently remove your ice luge from the freezer. Allow the mold to acclimate for approxinately 10-15 minutes before cutting the seal. Ice is sensitive and cracks easily when leaving a freeze. 2. Use a utility knife and/or scissors to cut along the seam of the mold. 3. Gently peel the mold from the ice. Any imperfections or residuein the ice may be scrapped smooth or buffed with a wet towel. DO NOT RUN UNDER A FAUCET 4. Straighten out the aluminum at the end of the mold and pull the aluminum wire using the handle or pliers. 5. Pull tubing out. It may be neccessary to pull at both ends to release it from the ice. 6. Place back in freezer , gently, if it is not being used immediately.